Use these simple steps to set up your myGMC Action on Google to send remote commands to your compatible GMC vehicle.
10/09/20
LIFTGATE GLOSSARY
Above Floor Travel
On specific rail-type models, this option allows your cargo to travel above the floor level of the truck or trailer based upon the bed height of your application.
On specific rail-type models, this option allows your cargo to travel above the floor level of the truck or trailer based upon the bed height of your application.
Bed Height
The vertical distance from ground level to the floor surface of the vehicle.
The vertical distance from ground level to the floor surface of the vehicle.
Bed Height Range
When specifying a liftgate, the lesser dimension refers to the bed height when the vehicle is loaded to maximum weight capacity. The greater dimension refers to the bed height when the vehicle is empty.
When specifying a liftgate, the lesser dimension refers to the bed height when the vehicle is loaded to maximum weight capacity. The greater dimension refers to the bed height when the vehicle is empty.
Below-Bed-Height Storage
Option found on many railgate models that allow the liftgate platform to be stored so its highest point is below the bed height of the vehicle, thus allowing unobstructed access to the rear of the vehicle without having to operate the liftgate.
Option found on many railgate models that allow the liftgate platform to be stored so its highest point is below the bed height of the vehicle, thus allowing unobstructed access to the rear of the vehicle without having to operate the liftgate.
Cart Stops
A device used to prevent wheeled cargo from rolling off the ramp end of the liftgate platform.
A device used to prevent wheeled cargo from rolling off the ramp end of the liftgate platform.
Conventional Liftgate
A liftgate that is welded or bolted to the frame of the vehicle chassis. In the stored or travel position, the lifting platform is in the vertical position at the rear of the vehicle.
Dock Bumpers
Optional protective steel structures used commonly with Flipaway models that are welded below bed level at the rear of the vehicle to protect the liftgate from damage caused by loading dock impact. May have the capacity to also house the vehicle tail lights.
Flipaway Liftgate
A liftgate that is welded to the frame of the vehicle chassis. The loading platform is designed with two or three folding sections. In the stored or travel position, the platform is folded and stored beneath the body floor allowing access to the cargo area without activating the lift.
A liftgate that is welded to the frame of the vehicle chassis. The loading platform is designed with two or three folding sections. In the stored or travel position, the platform is folded and stored beneath the body floor allowing access to the cargo area without activating the lift.
Cantilever Lift
A Cantilever liftgate is a self-adjusting platform that stays level relative to the truck bed throughout the entire raise and lower cycle. Options are also available to convert the platform to a dock board or for use as a rear door.
A Cantilever liftgate is a self-adjusting platform that stays level relative to the truck bed throughout the entire raise and lower cycle. Options are also available to convert the platform to a dock board or for use as a rear door.
Gravity Open, Power Close
Hydraulic close, torsion spring/gravity open.
Galvanization
The process of applying a protective zinc coating to steel or iron, in order to prevent rusting.
The process of applying a protective zinc coating to steel or iron, in order to prevent rusting.
Load Capacity
Maximum amount of cargo weight that a given liftgate is rated to handle during one cycle. Full rated capacity is based on the cargo being centered on the platform as close to the vehicle as possible or the weight being evenly distributed over the entire platform surface.
Maximum amount of cargo weight that a given liftgate is rated to handle during one cycle. Full rated capacity is based on the cargo being centered on the platform as close to the vehicle as possible or the weight being evenly distributed over the entire platform surface.
Mount Frame Clearance
Distance required between the rear-most obstruction on the chassis and the end of the vehicle body in order to mount a liftgate.
Distance required between the rear-most obstruction on the chassis and the end of the vehicle body in order to mount a liftgate.
Power Open, Power Close
Hydraulic operation of the liftgate platform during the open and closing portion of the cycle, which allows for consistent opening and closing speed regardless of the climate conditions.
Hydraulic operation of the liftgate platform during the open and closing portion of the cycle, which allows for consistent opening and closing speed regardless of the climate conditions.
Power Up, Gravity Down
Hydraulic operation raises the liftgate platform, while its own weight lowers it.
Hydraulic operation raises the liftgate platform, while its own weight lowers it.
Power Up, Power Down
Hydraulic operation of the liftgate platform during the raise and lower portion of the cycle, which allows for consistent lifting and lowering speed, regardless of the climate conditions.
Hydraulic operation of the liftgate platform during the raise and lower portion of the cycle, which allows for consistent lifting and lowering speed, regardless of the climate conditions.
Rail-Type Liftgate
Medium / Heavy / Bottle Gas / Pick-Up / Service Body / Dump Thru
Railgates have vertical tracks that weld or bolt to the rear frame of a truck body or trailer. The loading platform travels up and down on these tracks through the use of cables or chains in conjunction with a hydraulic cylinder, or the use of two hydraulic cylinders directly attached to the loading platform. In the travel position, the platform stores over the rear door, although an option is available to allow storage below the door.
• Medium Rail-Type Liftgate – References the lift capacity. • Heavy Rail-Type Liftgate – References the lift capacity. • Bottle Gas (BG) Rail-Type Liftgate – Offers design features targeted to the bottle gas delivery industry.
Reduced Maintenance
Standard on all Waltco liftgate models, independently or a combination of fiberglass-reinforced Teflon™ bearings, slide pads and grease zerks to allow additional protection to the major pivot points on your liftgate.
Retention Rail
Railing around the platform perimeter that supports and restrains bottled gas cylinders during delivery. Used on MDLBG, PTBG, RBGL and WDVBG Bottled Gas models.
Sideloader Liftgate
A liftgate that is typically mounted below the side door of a truck body or trailer and can be either frame or body mounted, depending on the application. In the stored or travel position, the platform stores under the body and is either unfolded or extended out from under the door.
A liftgate that is typically mounted below the side door of a truck body or trailer and can be either frame or body mounted, depending on the application. In the stored or travel position, the platform stores under the body and is either unfolded or extended out from under the door.
Snubber Kit
A structure consisting of a steel brace and a rubber bumper pad used commonly with Flipaway models. The snubber kit stabilizes the liftgate platform while in the transit position, minimizing potential for damage due to bouncing and/or road vibration.
A structure consisting of a steel brace and a rubber bumper pad used commonly with Flipaway models. The snubber kit stabilizes the liftgate platform while in the transit position, minimizing potential for damage due to bouncing and/or road vibration.
Torsion Bar Assist
Reduces platform opening and closing forces with the use of spring loaded counterbalanced torsion bars or rods.
Reduces platform opening and closing forces with the use of spring loaded counterbalanced torsion bars or rods.
Source: Waltco Liftgates - https://www.hiab.com/en-US/waltco/
10/07/20
CTech Work Truck Cabinets and Drawers
A big day for CTech as we participate in our first-ever virtual conference with the 15th Annual North American Caterpillar Dealers Procurement/Fleet Group. We've been hard at work gathering and editing footage for a feature-length commercial to show during the conference.
10/05/20
The UnderCover Ultra Flex with Katie Osborne | presented by Truck Hero
Katie Osborne takes a look at one of UnderCover's most popular truck bed covers, the Ultra Flex.
10/03/20
How to Set Up Weight Distribution | BetterWeigh™ Mobile Towing Scale
This video describes how to use the Weight Distribution feature of the CURT BetterWeigh™ mobile towing scale. With this feature, you can easily set up your weight distribution hitch without the need for a measuring tape, pen and paper.
The CURT BetterWeigh™ #51701 is a Bluetooth-enabled OBD2 device that wirelessly syncs with your smartphone to provide a variety of vehicle and trailer weights. This includes vehicle weight, GCW, payload, tongue weight and pin weight, as well as weight distribution setup and trailer brake gain.
To begin setting up your weight distribution hitch with the CURT BetterWeigh™, choose the weight range that best suits your vehicle-trailer setup. To set the range, tap the gear icon and select Weight Distribution. Then, select a weight range.
Next, select the Weight Distribution feature on the BetterWeigh™ app homescreen. Before pressing Ready, make sure your vehicle and trailer are aligned and ready to be coupled. Turn off the engine. Then, step back from the vehicle and tap Ready. BetterWeigh™ will take an initial reading of your vehicle’s pitch.
Once the vehicle pitch is analyzed, lower the trailer tongue until the coupler is resting on the ball. BetterWeigh™ will then display the trailer tongue weight. Tap Ready again to see the weight distribution relative scale. Weights will be shown across the front, rear and trailer axle. The goal is to redistribute the weight toward the front vehicle axle.
Next, attach the weight distribution spring bars to the trailer. Then, raise the trailer jack off the ground to see the initial weight distribution reading. Adjust the weight distribution hitch until the front end axle is in the green zone on the app.
Finish connecting your trailer, and you’re ready to tow!
BetterWeigh™ is compatible with Apple and Android phones. Download the BetterWeigh™ app from Google Play or the App Store.
Learn more at www.curtmfg.com/betterweigh
10/01/20
BEDBIN by BEDSLIDE
Take a closer look at the BEDSLIDE accessories. See how the BEDBINS work with everyday items and why they are a great addition to your BEDSLIDE.
9/29/20
CargoGlide Testimonial Commercial Application
With 2200 lb capacity:
- 100% of the Cargo Tray Length Slides Out for Total Access to your Cargo.
- Real plywood deck with a TPO rubber laminated surface for strength and durability.
- 22 Industrial Cam Follower Needle and Ball Bearings provide Dependable Lasting support for the Cargo You Haul in Your CargoGlide.
- Powder Coated Industrial 4 in. high extruded 6061-T6 Thick Aluminum Side Rails with integrated Full Perimeter Tie-Down Tracks
- 4 Infinitely Adjustable Eyebolt Tie-Downs to make securing cargo easy and versatile.
- Includes 8 inch High Side Extensions on the first four feet of the rails at the cab end that helps contain more cargo.
- Comes fully assembled for easy installation by either 2 people or an available National Dealer Installer.
Subscribe to:
Posts (Atom)