8/30/17

Knapheide KUV Utility Van Is Very Popular With Contractors


Ron Sadler, Commercial Department Manager shows off a very popular unit on a cutaway van. This is an 11' KUV enclosed service body that is very popular with plumbers and many other contractors too. There's room inside to carry tall items, pipe, and much more, plus all the storage on the outside that is under lock and key. It is also low to the ground to make it easy to get in and out of the cab or the back end.

See more about our commercial truck department at http://www.lehmersgmc.com

8/28/17

Highway Products | Warehouse Walkthrough


Products, Inc. was founded in 1980 and we have been fabricating aluminum ever since. We back all of our products with a Lifetime Warranty.

8/26/17

TRANSFER FLOW - INCREASE YOUR CAPACITY FOR FUEL AND PROFITS!


A Transfer Flow fuel tank installed on your work truck allows you to spend less time at the fuel pump and more time on the job. Increased capacity gives you the option to shop for the best fuel prices, and save money by purchasing more fuel at one time.


With almost 35 years of engineering and manufacturing fuel tank systems, some of the biggest and best companies trust Transfer Flow for their fuel system needs. To increase the driving range on one vehicle or a fleet of vehicles, we have the manufacturing capabilities and product diversity to help you grow your business.

Increase your capacity for fuel and profits by contacting us at 800-826-5776 or visit our website at transferflow.com.

Transfer Flow – we fuel YOUR success!

8/24/17

IMPROVE YOUR AIR COMPRESSOR’S PERFORMANCE THIS WINTER


Though it may feel like summer just started, the reality is that fall is just around the corner, and with it comes the rain, frost, ice, and in most cases, snow. Now is the time to start planning and ensuring that this winter your equipment is ready to work as hard as you do in the freezing temperatures.

Think back to last year’s winter season, did your air compressor let you down in any of the following ways?

• Refused to start

• Broke down frequently

• Caused a cumbersome safety hazard while parked on the side of the road

• Required maintenance to be done standing in the truck bed or on a ladder next to your truck

• Required snow and slush to be dug out from around the deck-mounted unit so it could warm up enough to run

If any of these challenges sounded familiar, then it’s time to consider upgrading to a VMAC UNDERHOOD rotary screw air compressor. Here’s how a VMAC UNDERHOOD air compressor solves each of these issues:

RELIABILITY

VMAC UNDERHOOD70 Installed on Truck
The last thing you need when working outside in the elements is difficulty starting your equipment, or an unexpected breakdown on the jobsite. The VMAC UNDERHOOD air compressor is very reliable, and proven to operate in extreme cold conditions. Manufactured in North America in an ISO 9001:2015 certified facility, VMAC air compressors and multipower systems meet high quality standards, and are backed by an industry-leading Lifetime Warranty (Limited).

MAINTENANCE

Maintenance costs are greatly reduced by investing in the UNDERHOOD air compressor as high quality aluminum parts, and few moving pieces means VMAC air compressors require less maintenance and servicing than a reciprocating air compressor. A VMAC UNDERHOOD air compressor also requires less maintenance than a hydraulic deck-mounted or engine driven air compressor because there is no hydraulic or engine-related components to maintain. To ensure the best performance, regular compressor maintenance is recommended by VMAC.

SAFETY

Above-deck air compressors can cause a major safety hazard in snowy and icy conditions. Operators have to climb into the back of a snow and ice-filled truck bed to dig out the air compressor to allow it to warm up enough to function. In addition, parking a tow-behind on the side of the road to conduct maintenance is challenging and dangerous, especially in bad weather. By having the UNDERHOOD air compressor stored safely under the hood, boots are kept on the ground, ensuring the safety of operators, and limiting OSHA and WCB concerns and claims.

COLD WEATHER STARTING

The VMAC UNDERHOOD air compressor is mounted directly on your truck’s engine, which warms up the compressor on the way to the jobsite, and keeps it warm and protected from the elements, even when temperatures drop well below freezing.

Working outside in harsh winter conditions can be challenging enough, especially when temperatures drop below freezing. The VMAC UNDERHOOD air compressor relieves common pain points that many operators suffer from each winter, from decreased productivity to unsafe working conditions. Waiting for an air compressor to warm up, climbing in the back of a slippery truck to dig out equipment, and conducting maintenance on the side of the road in dangerous driving conditions are just some of the challenges that you can take out of the equation with a VMAC UNDERHOOD air compressor. So when planning your investments for this winter, include an upgrade to a VMAC UNDERHOOD rotary screw air compressor, contact sales@vmacair.com.

Learn more about VMAC’s line of UNDERHOOD air compressors, ranging from 30 CFM up to 150 CFM outputs.

8/22/17

Knapheide 8' Service Body Is Our Most Popular Work Truck


Ron Sadler, Commercial Department Manager shows of the biggest selling unit he stocks: The 8' service body with a rack on a 2500HD chassis. Drives like a pickup but carries so much more.

8/20/17

Boss TGS Spreaders disperse deicing materials quickly and efficiently

tgs-300-action

The TGS Spreader series from BOSS is the easiest way to arm yourself against all things snow and ice. BOSS tailgate-mounted spreaders attach easily and disperse deicing materials quickly and efficiently to make your job as smooth and steady as possible. All TGS Spreaders are built heavy-duty to handle harsh conditions quickly and efficiently, because BOSS knows the faster you can RESTORE ORDER to your community, the better.
  • Low Profile Design Poly Hopper is designed so that your vision is not obstructed.
  • Solid Poly Hopper Cover is designed to last longer and prevent moisture from entering the hopper.
  • Top Screen with Bag Splitter easily opens bags and filters deicing material.
  • Enclosed 12-Volt Electric High-Torque Motor completely sealed and enclosed.

8/18/17

WEATHER GUARD Defender Series Truck Boxes


WEATHER GUARD introduces a new line of truck boxes with Defender Series. Watch this video and understand the differences between WEATHER GUARD and Defender Series.

8/16/17

Tommy Gate's G2 Series Liftgate



Tommy Gate's G2 Series is the latest in parallel-arm technology. Dual hydraulic cylinders apply direct power to both sides of the platform for increased consistency in motion and stability. With reduced maintenance requirements, wide variety of platform options, and vast hitch compatibility, G2 Series hydraulic lifts are a strong, versatile lift that are convenient, efficient, and make trucks work better.

Liftgate Features

    Dual hydraulic cylinders
    Maintenance-free components
    Recessed control
    Larger platforms
    Fully-enclosed hydraulic system

8/14/17

Highway Products | Aluminum Strongback Flatbeds


100% Aluminum flatbeds are 1/2 the weight of steel flatbeds. By reducing the weight of your flatbed you will be able to carry a heavier load and you will conserve fuel.

We over build these flatbeds because we want them to last longer than your truck.

We back our products by offering a True Lifetime Warranty.

http://www.highwayproducts.com/

8/12/17

CargoGlide HVAC WallGlide 30 Broadcast


CargoGlide HVAC WallGlide 30 Broadcast showing the features and benefits 
of the WallGlide system

8/10/17

WEATHER GUARD | EZGLIDE2 Drop-Down Ladder Rack Walk Around


Weather Guard Van Roof Racks Create Space To Carry Long Equipment. 

Weather Guard Van Roof Racks are made of aluminum, steel and plastic to provide long lasting durability even in harsh outdoor elements. Roof racks fit vans with roof racks. Additional Cross Members can be added for longer material and ladders. Velcro straps assist in securing objects for transport. Anti-wear protection on cross members protect ladders and building materials during transport. Available styles include All Purpose Van Rack, Conduit Carrier, Conduit Carrier w/Extension, Conduit Carrier Kit and Cross Member. Types are 2- or 3-Cross Member, or High Roof for Full Size, 11-Foot or Minivans. ARMOR-TUF® Powder Coat finish available in White, Black, Red or Aluminum. Fits van models including Chevy, GMC and Ford. Dimensions vary.

8/08/17

Truck U - Load'N'Go Powerbody Work Truck


Truck U on the SPEED Channel hosts Matt Steele and Bruno Massel demonstrate the Load'N'Go Powerbody slip-on work truck tool box from Fleetwest Transferable Truck Bodies. The work truck industries original full size steel pickup truck utility - service body.

8/06/17

Which BEDSLIDE is right for you?


BEDSLIDE now offers 5 models of BED SLIDE Cargo Trays. Which BEDSLIDE is right for you? The BEDSLIDE is the best truck bed accessory to help access tools and equipment.

8/04/17

Highway Products | Custom Fabrication [Roll Up Tool-Boxes]



Roll-Up Boxes are an ideal choice for those who need storage with a lid that can move completely out of the way of your workspace. Fire-fighters, emergency workers, on-site contractors and many other professionals across various industries find the extra storage invaluable in their every day work environment. 

Roll-Up Boxes are a type of custom truck toolbox made by Highway Products Inc.

8/02/17

Custom Designed Welders Bodies by Harbor Truck Bodies






It seems that there's no such thing as a standard Welder Body because every welder want something different.Harbor can custom build a Welders Body for each customers unique needs.Here's a 9' Low Pro 34" Open Top Service Body with Stainless Steel lids and with slightly raised front compartments to the standard height of 40" closed compartment style.

This also has a small sized transverse compartment with two compartments for tall gas bottles in storage, while in the main front compartment are bottle brackets and rings for short gas bottles. This also has the rear compartment cut off and an 18" work platform with V-groove on the back plus the standard 8" step bumper.

This is all mounted on a new Dodge 3500 regular cab chassis and makes for a very clean looking rig.

Let Harbor create a unique body for you! Call 800-433-9452. www.htbi.net