5/31/19

Lehmer's GMC - A Harbor Truck Bodies Stocking Dealer


 
Northern California Stocking Dealer

Lehmer's GMC
1905 Martket St
Concord CA 94520
Ron Sadler
rsadler@lehmers.com
925-688-4401
925-628-1301 Cell 



5/29/19

What’s The Deal With Underdeck Air Compressors?

 VMAC-DTM70-Air-Compressor

Underdeck air compressors is another name for PTO driven air compressors, a compressed air system that is powered by a vehicle’s transmission via a PTO. PTO air compressors are frequently nicknamed “underdeck” because of their mounting position, under the deck of a service truck.
Underdeck air compressors come in hydraulic and non-hydraulic varieties, giving operators options depending on their specific needs. Most hydraulic varieties are intended for service trucks with hydraulic cranes, tool circuits, and outriggers, while non-hydraulic underdeck air compressors work well for countless applications.

What are the advantages of underdeck air compressors?

Underdeck air compressors are an innovative solution for providing compressed air and have many benefits over traditional above-deck air compressors. The advantages of underdeck air compressors include:
  • Free up cargo space
  • Reduce GVW
  • 50 to 200 CFM
  • 100% duty cycle
  • Hydraulic option
  • Few moving parts
  • Less maintenance

Who makes underdeck air compressors?

There are three primary manufacturers of underdeck air compressors in North America:
Each manufacturer’s product is quite different, varying in design and system specifications. Anyone considering an underdeck system should carefully consider all of their options before making a purchase.

How much do underdeck air compressors cost?

The exact price of an underdeck air compressor will vary depending on a variety of factors, including the manufacturer, dealer mark-up, region, specific technology, and more. In addition, there are two different factors that determine the cost of any vehicle-integrated air compressor:
  • System price
  • Install price
It’s important to look at both the system price and the install price when comparing air compressor solutions. In some cases, the install time of an underdeck air compressor can save you money when compared to seemingly less expensive systems with longer install times.
Here are a couple of examples from VMAC’s product line of estimated install times for an experienced upfitter:

Estimated Install Hours For Vehicle-Integrated Systems


Ford 2018 6.7L Power Stroke V8 DieselRAM 2018 6.7L Cummins 24V Inline 6 Diesel
UNDERHOOD™ 7018-22 hrs18-24 hrs
Direct-Transmission Mounted 70 (“underdeck”)16-18 hrs16-18 hrs
DISCLAIMER ON INSTALL TIMES: Install times are based upon having pre-read the install manual, being an experienced installer, and having the tools, system and vehicle prepped for install. Times may vary plus/minus 4 hours of the suggested install times published in this document.
To get the most accurate pricing for an underdeck air compressor, we recommend reaching out to a trusted VMAC Dealer.

What else do I need to know?

The main thing you need to know is that underdeck air compressors are awesome!
But before buying one, there’s a little more research you should do. We’ve put together an extensive article on underdeck air compressors, “What Is A PTO Driven Air Compressor?”, which covers everything you need to know about these innovative systems:
  • Advantages
  • Compatible Vehicles
  • Direct-Mounted vs. Shaft Mounted
  • Fully Engineered Systems vs. Installation Kits
  • Transfer Case Design
  • Weight
  • And more
Check out our PTO Driven Air Compressor article to learn more about underdeck air compressors!

5/27/19

DECKED Presents | Ultimate Storage, Maximum Function




DECKED designs and manufactures fully engineered, 100% American Made truck bed storage systems with a true 2000 lb payload and a steel subframe. The DECKED system will keep your tools and gear dry, secure and organized. #worksmarterplayharder For more info on DECKED visit https://decked.com/

5/25/19

Venco Venturo Industries, LLC Electric-Hydraulic Cranes 2019 NTEA




ET6K ELECTRIC-HYDRAULIC CRANE Max. Capacity 2,000 lb - Crane Rating 6,000 ft-lb - Max. Reach 10 ft Min. Truck Size Needed (GVWR) Class 2 (8,000 lb)

 The Venturo ET6K service crane is a 6,000 ft.-lbs. crane with 2,000 lb. lifting capacity featuring electric winch, power rotation and hydraulic boom elevation with a single, manual extension up to 10 ft.

ET12KXP ELECTRIC-HYDRAULIC CRANE Max. Capacity 3,500 lb, Crane Rating 12,000 ft-lb, Max. Reach 16 ft Min. Truck Size Needed (GVWR) Class 2 (8,800 lbs GVWR)

With a 12,000 FT-LB rating and a 3,500 LB maximum capacity, the ET12KXP can be installed on trucks with a minimum Class 2 (8,800 lbs GVWR). The ET12KXP features proportional control, single-stage full-hydraulic extension and a one-piece hexagonal boom for increased strength. This new crane features a 9′ – 16′ reach.

 ET12K(X) ELECTRIC-HYDRAULIC CRANE Max. Capacity 3,500 lb - Crane Rating 12,000 ft-lb - Max. Reach 15 ft Min. Truck Size Needed (GVWR) Class 2 (8,800 lb)

The Venturo ET12KX service crane is a versatile application that is neither too large or too small for a majority of lifting jobs. This crane has been utilized heavily in municipal/public works industry lifting anything from service equipment to fire hydrants throughout the United States.

 With a 12,000 FT-LB rating and a 3,500 LB maximum capacity, the ET12KX can be installed on trucks with a minimum 8,800 GVWR.

The ET12K(X) comes in two configurations; the ET12K offers two-stage manual boom extension, and the ET12KX offers single-stage hydraulic extension with a secondary manual boom extension.

5/23/19

Modular Van Interiors From Harbor Truck Body & Van



Warren with Harbor Truck Body and Van shows off the modular van interiors bin packages available for all types of commercial vans. See more at http://www.harbortruck.com

5/21/19

Transfer Flow 50 Gallon Replacement Tanks 2019 NTEA


REPLACEMENT FUEL TANKS Eliminate half your fuel stops and increase your driving range by replacing the stock fuel tank with a high-capacity Transfer Flow midship replacement fuel tank system that doesn’t sacrifice bed space or ground clearance.

5/19/19

SWITCH-N-GO 2019 NTEA



Switch-N-Go® is our detachable truck body system that can be installed on Class 4 – 7 medium-duty work trucks (11,000-26,000 GVW).

 We stock five unique body styles including Dump, Platform, Storage, Drop and Chipper boxes providing a fleet of job opportunities from a single truck.

 Body Interchangeability allows you to drop a box at one job site and drive to another job with equipment or materials maximizing your truck and labor investments. Also, the ground-level loading and unloading allows for faster and safer work! Loading a Fixed body truck takes longer and back related injuries are much more likely to occur.

5/17/19

Autonomy: Partnerships of sky and ground

What is likely to happen on the road to autonomous vehicles is partnerships between truck makers and tech companies.   

autonomous trucks

Sticking with the theme of disruption and transformation, nothing has the potential to be more disruption in the trucking industry than autonomous vehicles.

At a recent NationaLease meeting, guest speaker John Paul MacDuffie, professor at the Wharton School at the University of Pennsylvania, said that autonomy requires new hardware components and lots of AI software. Engineering talent will be one of the keys to its success along with the ability to get the system integration piece of the equation right. MacDuffie does not see technology firms jumping in to manufacture vehicles but rather, working on developing operating systems for autonomous vehicles.

We are already seeing incremental moves toward autonomy with some of the advanced driver assistance features that are available on trucks today. This includes things like collision mitigation and lane departure systems.

The Society of Automotive Engineers (SAE) has defined six levels of autonomy from zero (no automation) to 5 (full automation). MacDuffie believes there is a big leap in getting from Level 2 autonomy to Level 3.

Level 2, or partial automation, allows steering and acceleration and deceleration to be automated “using information about the driving environment…with the exception that the human driver perform all remaining aspects of the dynamic driving task,” according to the SAE definition. The human driver is tasked with monitoring the driving environment.

In Level 3, or conditional automation, the system monitors the driving environment while the driver will respond appropriately to a request by the system to intervene.

“Level 3 automation is particularly tricky,” MacDuffie said. How to safely transfer control from the computer to the driver, particularly in emergency situations, needs to be worked out. “[There has to be a] balancing act of providing drivers with the benefits of autonomy — like not having to pay attention — while ensuring they are ready to grab the wheel if the [vehicle] encounters something it can’t handle.”

What is likely to happen on the road to autonomous vehicles, according to MacDuffie, is partnerships between truck makers and tech companies — what he calls “partnerships of ‘sky’ and ‘ground.’”
He added, “The winning combination will succeed not just in meeting customer needs/wants, but also societal goals and expectations.”

SOURCE:  https://www.fleetowner.com/ideaxchange/autonomy-partnerships-sky-and-ground?NL=FO-02&Issue=FO-02_20190516_FO-02_185&sfvc4enews=42&cl=article_4&utm_rid=CPENT000004488230&utm_campaign=24750&utm_medium=email&elq2=f9e997d742a94887aa813eec4c80d2e2

5/15/19

Kargo Master Demonstrates Aluminum Drawer Units – NTEA Show


David demonstrated Kargo Master’s Aluminum Drawer Units. They’re 52 inches deep, light and right weighted, easy to assemble and easy to install. They yield a lower installed cost to the dealer. Innovative plastic tote holders finish this impressive set of store-all drawers. There is also an integrated wing kit which is a big-time saver as opposed to a bolt-on kit and is used by major rental truck fleets.

5/13/19

Gas vs. Diesel: Which To Spec

Gas vs. Diesel Blog

Today’s comprehensive selection of commercial vehicle engines offers many benefits to customers.

A myriad of choices enable customers to select the engine that best fits their application without sacrificing torque, fuel efficiency, horsepower and more.

While the vast engine choices create additional value, it can also create a dilemma when it comes to properly spec’ing the engine for the intended application of the vehicle. Purchasers may be overwhelmed by the selection and consequently choose an engine that doesn’t best fit the requirements. Over spec’ing and under spec’ing are common mistakes, leading to lost efficiency, productivity or a longer return on investment period.

Within the last few years, commercial vehicle manufacturers have vastly increased engine choices. The most notable additions have been diesel engines within several Class 1 light duty pickups and gasoline engines within Class 6 and Class 7 medium duty trucks. While gasoline engines still dominate Class 1 and diesel engines make up the majority of Class 6 and Class 7, these new engine choices make the decision much more analytical than ever before.

So how do you know which engine is right for the job? There are many factors to consider as it pertains to the engine when in the market for a new commercial vehicle.

Cost
Commercial vehicles would all be perfect if cost didn’t need to be factored into the equation.

Unfortunately, the real world operates on financial constraints so unlimited funding for your next work truck just isn’t feasible. That being said, cost is a major influencer on the selection of the commercial vehicle, especially as it relates to the engine.

Acquisition costs can be substantially higher with diesel engines, stretching from $8,000 more in light duty commercial vehicles up to $12,000* in heavy duty commercial trucks. Gasoline engines offer the advantage with significantly lower acquisition costs.

Horsepower & Torque
Selecting an engine with enough horsepower and torque is vital for success with many commercial vehicles. The most common application considered for ample horsepower and torque is pulling a trailer, regardless of size. The more weight on the trailer, the more important horsepower and torque becomes. Other applications, including hauling bulk material, should also pay close attention to the horsepower and torque ratings of an engine as these vehicles are consistently hauling the maximum available payload.

While gasoline and diesel engines have similar horsepower ratings, they are vastly different with torque. Looking at a class 3 pickup, the diesel has a slight advantage in horsepower rating yet boasts a torque rating two times that of the gas engine**. Point being, if you are towing heavy loads or your application relies upon torque to get you moving a diesel will be the better fit for you.


Fuel Efficiency
Federal regulations have forced commercial vehicle manufacturers to maximize fuel efficiency within new vehicles, regardless if they contain diesel or gasoline engines. This has caused the gap of fuel efficiency between gasoline and diesel engines to shrink. Historically, diesel engines have held the advantage of fuel efficiency over gasoline engines. Today, you can expect a slight difference between most gasoline and diesel engine choices. For instance, with a light duty Class 1 pickup you can expect to see a combined fuel efficiency rating of 20 mpg with the gasoline engine and a combined fuel efficiency rating of 23 mpg with the diesel engine***.

Commercial vehicle customers should compare the price per gallon of diesel and unleaded fuel and factor in projected annual mileage to determine overall fuel costs.

PTO Provisions
Snowplows, dumps, cranes, many different applications require a power-take-off (PTO). To avoid potential compatibility issues, ensure the engine (and transmission) you select will allow for PTO installation. Many truck manufacturers offer a “PTO prep” option, making the installation of the PTO unit more seamless for the upfitter.

At one time, your only choice for PTO compatible engines were diesels. Today, many manufacturers offer gas engines that can easily accommodate a PTO unit for auxiliary equipment.

Idle Frequency
Engine idling is common within many vocations that employ commercial vehicles to get the job done. Today, many local and state regulations are in place to discourage companies from engine idling. This has led to many product developments, including stand-alone, mobile power systems that mount on the commercial vehicle. For companies that are still allowed to idle their engines on the job, there are obvious benefits associated with diesel engines.

Diesel engines idle at a lower speed and are engineered for severe duty cycles, making them the more popular choice within high-idle applications.

Maintenance
The longer the life cycle of the vehicle, the more vital engine maintenance will become. There are many considerations to be made as it pertains to maintenance including cost of replacement parts, preventative maintenance intervals, qualified technicians, warranty coverage and more.

While diesels have longer maintenance intervals and warranty coverage, there are additional components and requirements (DEF fluid) that aren’t found on gasoline engines. Diesel replacement parts tend to be more expensive and finding qualified diesel mechanics can be a challenge in certain geographic areas.

Cost leans heavily towards gasoline while torque, engine life, fuel efficiency and idle frequency favors diesel. PTO provisions and maintenance are heavily reliant upon the application. As always, be sure to have a clear understanding of the intended application of the vehicle to help ensure you make the best selection for the job at hand.

*Comparing 2016 Ford F-250 gas(6.2L) and diesel (6.7L) pickup for light duty and 2017 Ford F-750 gas (6.8L) and diesel (6.7L) cab chassis for heavy duty, prices are MSRP from ford.com.
**Comparing 2016 3500HD pickup with Vortec 6.0L V8 gas engine rated at 360 horsepower and 380 ft-lb. of torque and Duramax 6.6L V8 diesel engine rated at 397 horsepower and 765 ft-lb. of torque
***Comparing 2016 Ram 1500 2wd with a 3.6L gas engine with 2016 Ram 1500 2wd with a 3.0L diesel engine, both models with 8 speed automatic transmission. Data obtained from National Highway Traffic Safety Administration (nhtsa.gov).

 Source:  https://www.knapheide.com/news/blog/2016/08/gas-vs-diesel-which-to-spec?utm_source=eloqua&utm_medium=email&utm_campaign=nurture&utm_content=tof-2&elqTrackId=cf5c9a60cb55496db9b8a0e6320093c3&elq=b7b12e3bfdc7462185b997ff4aa710e4&elqaid=1067&elqat=1&elqCampaignId=518

5/11/19

Auto Crane


Manufacturing Marvels segment aired on Fox Business Channel ©2015 about the Auto Crane Company

5/07/19

Turn your pickup truck into a complete commercial service vehicle

 compak-warehouse

All SpaceKap™ models are slip-in transferable service bodies offer a universal fit for all full-size pickup trucks in the market. You can easily install or remove the capsule from your pickup truck within few minutes if you need to switch vehicles or replace your truck. Once fitted with shelves and ladder or step ladder racks, it keeps your tools and equipment safe and well organized, to save you time and money.

OUR MODELS

Manufactured since 1992, the SpaceKap™ is considered an attractive and eco-friendly solution that meets the transport needs of businesses of all sizes. SpaceKap™ units are affordable, safe, reusable and transferable from one vehicle to another, to turn any pickup truck into a service vehicle.The pickup-SpaceKap combo is 12% more fuel efficient than a cargo van, making it the ultimate solution for truck fleets.

Models:

Spacekap Compak with open doors and sliding tray

Compak



Spacekap Wild with back and side door open







Spacekap Diablo with door open






Learn more at: http://www.spacekap.com/





5/05/19

GMC CarbonPro Delivers Innovation and Durability Where It Counts

2019 GMC Sierra Denali CarbonPro Edition
DETROIT — Starting production in early June, GMC Sierra CarbonPro TM Editions will begin appearing at select dealerships this summer, available on the Sierra Denali 1500 and the Sierra AT4 1500. The purpose-built CarbonPro bed is the first application of its kind for carbon fiber composite and delivers best-in-class dent, scratch and corrosion resistance.
“CarbonPro is made of the same raw material found in seven-figure super cars and even aerospace applications,” said Duncan Aldred, vice president, Global GMC. “Coupled with offering the world’s first six-function MultiPro tailgate, the 2019 Sierra packs a one-two hauling punch for whatever the situation demands.”
The two back end segment firsts are just some of the innovative features to debut on the 2019 GMC Sierra. An available ProGrade Trailering System with in-vehicle trailering app offers a connected suite of trailering technology to bring more confidence to towing while an available Rear Camera Mirror1 uses a camera mirror display that provides a wide, unobstructed view to help avoid common visual obstructions like occupants or cargo. Also available is a Multicolor 15-inch Diagonal Head-Up Display.  
Key benefits of the CarbonPro bed include:
  • Strength, durability and scratch resistance: The carbon fiber composite material provides the most scratch, dent and corrosion-resistant pickup bed in the industry.
  • Corrosion-resistance: Carbon fiber composite naturally resists corrosion, helping the bed withstand weathering and maintain a premium appearance over the life of the truck.
  • Reduced weight: The CarbonPro bed weighs 25 percent less than a traditional steel bed, removing roughly 60 pounds of vehicle mass. Its grained surface also negates the need for bed liners, potentially saving further vehicle mass.
  • More volume: The CarbonPro bed design enables best-in-class cargo volume, increasing the already class-leading volume of the Sierra’s roll-formed steel bed by 1 cubic foot.
  • More functionality: The CarbonPro bed features indentations specifically designed for tires of dirt and street bikes. Two additional tie-down locations are installed at the front of the bed.
Rigorous validation testing
The CarbonPro bed was rigorously developed to help ensure long-term pickup bed durability and functionality.
Examples of the validation testing include:
  • Drop tests: Large and heavy loads were repeatedly dropped on the CarbonPro bed to replicate extreme use scenarios. Testing included dropping cinder blocks, 1800-pound loads of gravel and 450-pound water-filled steel drums from varying heights.
  • Corrosion test: CarbonPro was subjected to corrosion testing but carbon fiber composite is naturally resistant to corrosion.
  • Snowmobile test: A snowmobile with metal studs on the track was driven into the bed and accelerated at full throttle with a 250-pound rider on board with only minimal scratching evident on the bed.
  • Extreme temperature testing: Validation work was performed in Yuma, Arizona, and Kapuskasing, Ontario, to help ensure CarbonPro holds up in unforgiving environments.
  • Generator test: High heat exposure involved aiming the exhaust from a portable generator directly at the corner of the bed to ensure heat and vibration would not degrade the bed.
Form meets function
The CarbonPro bed offers best-in-class cargo volume thanks to its sidewalls being pushed out farther, made possible by the formability of carbon fiber composite that allows molding deep and complex shapes with variable thicknesses. Like the steel bed, the CarbonPro bed provides the ability to slide a 2-inch by 6-inch wooden divider into pockets in the bed wall for cargo organization and separation.
Purposefully grained corrugation optimizes traction and cleanup, with more aggressive graining at the tops of the corrugation to help increase traction in wet weather and a smoother grain at the bottoms of the corrugation for easy dirt and debris removal.
The carbon fiber composite bed does not need to be painted, since the composite material creates a premium surface and is UV stable.  
“The bed is the working end of a truck; it’s what brings buyers to the segment,” said Tim Herrick, executive chief engineer, Full-Size Trucks, General Motors, “Loaded with motorcycles, snowmobiles or dirt bikes, CarbonPro in the 2019 GMC Sierra is sure to impress with its strength, space and innovation.”
Additional details
  • Spray-in bedliner not needed: Because carbon fiber composite is exceptionally durable, a spray-in bedliner is not necessary to help prevent damage and therefore will not be packaged on models with the CarbonPro bed. The composite material is rugged yet nonabrasive.
  • Rear wheelhouse liners not needed: Because of CarbonPro’s increased dent resistance versus aluminum or steel, no wheelhouse liner is installed from the factory.
  • Payload increase: Models equipped with the CarbonPro bed offer an increase in payload over a steel bed due to the mass savings of carbon fiber composite. Payload for these models is at least 59 pounds higher, depending on the configurations and equipment.
Availability
Sierra CarbonPro Edition makes a limited debut for the 2019 model year and is available for both the Sierra Denali 1500 and the Sierra AT4 1500. CarbonPro will be available in greater quantity on both trims for the 2020 model year.
About GMC
With a strong foundation of manufacturing trucks since 1902 and now selling in a dozen countries across the world, GMC offers purpose-built vehicles designed and engineered to the highest standard. From the all-new compact SUV Terrain to the Sierra HD, our trucks and crossovers deliver GMC’s signature combination of intuitive technologies and premium execution, with the popular Denali sub-brand representing the pinnacle of GMC design, performance and amenities. Details on all GMC models are available at www.gmc.com, on Twitter at @gmc or at www.facebook.com/gmc.

5/03/19

Quick Guide To Industry Acronyms

 Quick Guide To Industry Acronyms


Understanding the many industry acronyms and terms can be overwhelming. This quick guide can get you up to speed on some of the most important terms and meanings.

GVW – Gross Vehicle Weight
This is the total weight of the truck, including all passengers, drivers, cargo, accessories, fuel, and fluid in the engine at any point in time. It is important that this measurement does not go over the GVWR, or it can be a safety hazard.

GVWR – Gross Vehicle Weight Rating
This is the maximum total vehicle weight that is safe for the truck, established by the chassis manufacturer. The weight of the truck, any cargo, and passengers including the driver, as well as any fuel and fluid in the engine is included in the rating. Chassis manufacturers will most often set the GVWR lower than the combined axle ratings (the total amount of weight an individual axle can carry). This is due to the chassis manufacturer’s internal safety standards for durability, stability, and handling, as well as SAE International test protocols.

GCWR – Gross Combined Weight Rating
Everything that moves with the vehicle is included in the GCWR. The weight of the truck, any cargo, passengers including the driver, any fluid or fuel in the truck, as well as the weight of the trailer and the trailer’s cargo is included. Exceeding the GCWR can cause a safety hazard.

Payload
The cargo carrying capacity of a vehicle is the payload. It is calculated by subtracting the vehicles’ weight including passengers and the driver from the GVWR. Exceeding the Payload capacity can cause damage to your suspension, chassis, frame, tires, and many other parts of the truck.

CA – Cab to Axle
The cab-to-axle measurement is the distance from the back of the truck cab to the center of the rear axle. Clear CA or effective CA is the distance from the rear surface of any obstruction behind the cab to the center of the rear axle. If you have a tandem axle truck, then it is measured to the midpoint between the two rear axles. This measurement can help you determine the length of the body that can be mounted on the chassis.

Wheelbase
The wheelbase is the distance between the centers of the front and rear axles. When the truck has more than two axels, it is the distance between the steering axle and the center point of the driving axle group. This can affect body installation, weight distribution, and truck performance.

SRW – Single Rear Wheel
A single rear wheel refers to a chassis that has one wheel on each side of the rear axle. Single Rear wheels make for smoother driving without cargo, as well as easier driving in cities, suburbs, and highways. These trucks are more affordable to purchase outright, and have better fuel economy. A single rear wheel has less towing capability than a dual rear wheel, and less stability when towing in windy conditions.

DRW – Dual Rear Wheel
A dual rear wheel refers to a chassis that has two wheels on each side of the rear axle. This feature is a must if you are towing large payloads, or driving through rough terrain. It adds stability to your truck which increases safety for your divers and cargo. Having a dual rear wheel will allow the driver to safely get off the road in the case of a tire blowing out. Trucks with a dual rear wheel can be difficult to maneuver in cities, where parking and tight streets can be challenging. This feature can also reduce the truck’s mpg, especially in cities, and increase maintenance costs, because there are at least two extra tires to replace or rotate.

CDL – Commercial Driver’s License
The vehicle’s GVWR is one of the factors that will effect whether the diver needs a CDL. If the truck has a GVWR, and GVW of 26,000 lbs. or lower, the driver does not need a CDL.

Class A
A Class A license is required to operate any combination of vehicles with a gross combination weight rating of 26,001 lbs. or more. This includes towing a trailer weighing over 10,000 lbs. which makes the vehicle and trailer rating over 26,001 lbs.

Class B
A Class B license is required to operate a single vehicle with a GVWR or 26,001 lbs. or more, and/or a vehicle with a GVWR of 26,001 lbs. or heavier that is towing another vehicle weighting up to 10,000 lbs.

Class C
A Class C license is required if the vehicle you intend to drive does not meet the criteria for either Class A or B and it is meant to transport either: 16 or more passengers including the driver or hazardous material.

Original Source: NTEA Truck Equipment Glossary


Blog Source: https://www.knapheide.com/news/blog/2018/08/quick-guide-to-industry-acronyms

5/01/19

The Harbor Service Body with a Cargo Bed Enclosure Keeps Stuff Out-Of-Sight



This is an example of a new GMC 2500HD chassis upfitted with a Harbor 8' Service Body with a Forklift-Loadable Rack, Class IV Receiver, and a 3-Piece Cargo Bed Enclosure. It's a great way to keep your stuff accessible and yet out of sight. Ron Sadler is the Fleet/Commercial Manager at Lehmer's Buick-GMC in Concord CA. See more at http://www.lehmersgmc.com