10/31/19

The Maxon Story


Maxon Lift Corp. was founded in 1957. That same year, owner Max Lugash invented the Tuk-A-Way® liftgate, which remains the largest selling style of liftgate in North America. For more than fifty years, Maxon Lift Corp. has initiated and developed a variety of innovative products that have become truck equipment industry benchmarks. More company information can be obtained from Maxon and local Maxon sales representatives at 800-227-4116 or www.maxonlift.com

10/29/19

Harbor Truck and Van

Harbor - Truck and Van
As America’s premier manufacturer of service and platform bodies (and now van interiors), we enjoy a long history of “industry-first” design innovations dedicated to making your job easier and more productive.
Our bodies are loaded with more industry-first innovations than any other company in the industry. Some examples are:
  • Stainless Steel Pop-Top Lids that are self-opening with the pull of a single lever (plus, they are impervious to the elements);
  • Modern Gas Shock door stays on all vertical doors;
  • Use of Teflon Glides on our telescoping Cargo Bed Enclosures (instead of roller bearings that irritatingly seize up) that glide open with the push of a single finger;
  • Push-Button Locks with a visible red band on the door lock telling you your door is not secured…if the red band shows, push in the button. Now your tools are secure;
  • Bumper step depth is 8 inches minimum and deep enough to give your boot a firm purchase on the bumper without slipping off. This makes for easy access to tools or materials from the bed area or rack. Hard to say why no one thought of this before! By the way, these bumpers are made of formed channel and are the heaviest duty in the industry!
These are but a few examples of Harbor’s industry-first inventions that many other companies have now adopted.

Learn more at: http://htbi.net/

10/25/19

Venturo Crane Selector


Looking to upfit your service truck with the proper Venturo crane package? Our calculator takes into account your gross vehicle weight and the necessary boom length and maximum load capacity for your job, and it simplifies your search with a selection of appropriate products. Enter your info below to make sure you pick the most suitable Venturo product for light, moderate or heavy-duty applications.

Follow this link to select a crane for your service body: 

https://www.venturo.com/crane-selector-web-tool-pairs-vehicles-with-cranes/

10/23/19

Steer your Fleet into the Future! NACVS Atlanta, Oct 28-31st

Test-Drive

Meet around 15,000 Industry professionals!

Get energized at NACV Show 2019 with actionable steps like implementing the best software, purchasing the right trailer bodies, and finding new contacts who can help you troubleshoot your problems so you can stop working overtime.
Small Fleets

Talk to suppliers in person so you can compare multiple options side-by-side. Adopt proven technologies and make informed decisions to take your company to the next level.
Large Fleets

Get face time with your primary and component suppliers so you can ask questions in person. Talk to new suppliers and discover the next game-changing technologies.

Learn more at: https://nacvshow.com/attend/


10/19/19

CURT's culture is built on change - CURT Towing Products


"CURT's culture is built on change. Our motto is: the only constant is change. This allows for continuous innovation and continuous improvement in our products and services. That's what makes this company different."

10/17/19

WeldMaster Truck Body - For the Jack of All Trades!


The urban welder is a jack of all trades. A little of this, and a little of that. And, of course, his or her work always includes some welding. Harbor created a jack of all trades truck just for her or him.  A service body with a welders edge!
  • 63-inch raised and vented front compartment with bottle brackets and rings inside to hold standard sized oxygen and acetylene tanks
  • Stainless Steel self-opening pop-top lids w/ body length compartment bins & 4" dividers
  • Push Button locking system with red band locking indicator
  • Modern gas shocks on each side opening door to keep them open during loading and unloading
  • 8" deep recessed bumper for sure footing when entering bed
  • Armless and self supporting tailgate work table
  • Adjustable, but lockable, shelving system
  • Weather shield system around locks, doors, and hingles, preventing leaks and securing the tools of your trade. Neoprene door seals, water-proof gaskets, self-sealing stainless steel rivets, and silky smooth three-point door latches with Teflon glides.

10/15/19

Knapheide Customer Story: MinuteMan Plumbing & Drain Services


MinuteMan Plumbing & Drain Services is dedicated to meeting the needs of commercial customers in Southern California, using their fleet of Knapheide KUV's to get the job done efficiently.

10/13/19

Sortimo = SORTING & MOBILITY

https://www.sortimo.us/files/source/pages/brand-center/media-resources/clean-dirty-images/New_Ford_E-Series_Clean_Dirty_(2)_w_divider_line.jpg


All vehicle organization systems by nature offer the user some level of organization.Even a basic three shelf system offers more organization than no shelving at all. The density of organization and storage of a Sortimo By Knapheide system makes it the premier organization system in the market today. Keeping your parts and tools organized means less time spent looking for items and the ability to easily inventory them on the vehicle.  Having the right parts and tools, and being able to find them when you want them, results in improved worker efficiency.

Other vehicle organization systems offer limited mobility. This is where the Sortimo ByKnapheide system is unique to the market.

Mobility is made possible through the use of BOXXes. 



Sortimo by Knapheide has many different types and sizes of BOXXes to meet your
organization needs. BOXXes are secured intotracks on the shelves that hold them in place
when the vehicle is in motion. Having the ability to remove the BOXXes from the vehicle and take them with you to the vehicle and out.

Learn more at:  https://www.sortimo.us


10/11/19

CTECH Manufacturing Company Overview


CTECH Manufacturing is a Wisconsin based Manufacturing company specializing in Aluminum Carts, Cabinets and Drawers. We have been in business for over 20 years. We started with deep roots in the race market and have serviced every major sanctioned race organization since that time. We bring that enthusiasm and quality to all of our product lines which ranges all markets from NASCAR race teams to Law Enforcement and University Facilities with our aluminum storage solutions.

Learn more at: https://www.ctechmanufacturing.com/

10/09/19

GODWIN 184U SERIES DUMP BODY


Small & Versatile

Godwin Mfg 184U Series Body

This body is available in lengths of 8' to 11' in 1' increments. Inside width from side to side is 84". SIDES: One piece sides with no welded seams. 10 gauge A607 grade-50 high tensile steel with boxed top rail and fully welded boxed rear corner post. 6" side board gussets with full length rub rails, and box-type sidebraces. RUB RAILS: Full length 45 degree deflector panels are an integral part of the sides. FLOOR: 10 gauge -two piece high tensile steel floor with 2" floor to side radius. A607 grade-50 steel. FRONT WALL: 10 gauge high tensile A607 grade 50 steel. Full width integral inverted V-type horizontal bracing.TAILGATE: 3 Panel fully boxed 10 gauge high tensile A607 grade 50 steel with boxed horizontal reinforcements and sloping lower deflector. Tailgate is 6" higher than side.TAILGATE HARDWARE: Heavy duty: Standard upper hardware is offset cast steel hinge. Lower hook is cast steel: engages tailgate pin from top. Banjo eye keeps tailgate chain in position you select. LIGHTS &REFLECTORS: FMVSS 108 lights are standard, recessed for protection, rubber mounted and shock proof. UNDERSTRUCTURE: Completely jig built with 3" structural channel crossmembers on 12" centers and 5"structural channel longitudinal. Crossmembers are gusseted and welded to longitudinals. POPULAR OPTIONS: 36" cab shield, 8 gauge sides, 3/16" one piece floor, fold down 13" sides, 18" sides, quick release upper hardware, other options available.
Learn more at: http://www.godwinmfg.com

10/07/19

Find the Right Van Accessories for Your Work Van

Find your Work Van with the Most Useful Van Accessories

An Upfit Package with Ranger Design


Getting the most from your work van is easy when you choose the right van accessories to help you become more organized and efficient. Good truck and van accessories will always pay for themselves by allowing you to maximize your cargo space and productivity, while also keeping your most expensive equipment protected.
With so many van accessories to choose from, the best way to find which ones work for you is to take some time to consider your needs. All tradesmen work differently, and every trade has their own basic tools. Make a list of all the equipment that you use daily. Consider ladders, large and small parts, and inventory. With a list in hand, you’ll be able to visualize your needs and determine which of the van accessories below will be the most beneficial.

Van Accessories for Organization:

Paper holdersbottle holders and reel holders are designed to increase organization by giving you a specific spot to store your equipment. Instead of rolling loose on the floor, your bottles and reels can be fastened down and within easy reach from the door. As for your paperwork and files, keep them all together in a paper holder where they won’t get ripped or crumpled.
Partskeepers are a great way to keep your smallest parts together and secured. With small, dividable bins, they offer a great storage system to take with you onto the job site. Sturdy yet lightweight, you can never have too many Partskeepers for your tools.
Storage bins are available in several sizes, and can be accessorized with bin dividers. These are ideal for holding items and inventory so you can find what you need quickly and easily. Like the Partskeepers, if you have many items to carry with you on the job, then these bins are the ideal solution.
Hooks come in several different styles and can be used to organize tools and equipment near the van doors to be most effective. Hard hat holders can keep frequently used hats within easy reach and safely stowed while on the road.

Van Accessories for Driver Comfort & Safety:

Lighting keeps the cargo space bright, making it easy to find your tools, no matter what time of day or night. It also eliminates any chance of receiving cuts and bruises when searching through your tools in the dark.
Rear Steps are extremely beneficial for tradesmen with high roof vans. Climbing in and out several times a day can put quite a strain on your legs and back, especially when carrying heavy items at the same time. The steps also provide a rugged grip in the winter, so there is no fear of slipping when getting in or out.
Grab Handles, like the rear steps, are designed to provide you with easier access into your van. Whether installed in a high roof of low roof work van, it is always useful to have something to hold onto. It can also be used to tie down additional cargo for safe transportation.
Flettner vents help protect you from any gasses/vapors or smells that may build up in the cargo area of your vehicle. It helps reduce heat build-up and allows moisture to escape should any materials or tools be stored while they are still wet. It is a simple way to stay healthy while working.
For more products to enhance driver comfort and safety, check out our Safety Equipment blog.
Van Accessories for Vehicle Security:
Lockable Doors and Drawers provide two advantages. They can better protect your inventory and tools by keeping them in one place on the rougher roads. Also, they can deter thieves and protect valuable tools while you’re on the job and your work van is left unattended.
Wire grills for your windows can also protect you against theft as well as prevent damage to the van during loading or unloading. They are an easy install and such a simple product that just might help save you a lot of money in the future.
Seat Covers help keep your work van seats clean and in good condition. Instead of getting dirt and grease on your seats and staining them permanently, use custom-fit covers that can be easily removed and washed. Come time to sell your vehicle, you will be grateful you kept them in such good condition.
Learn other simple tricks to help Safeguard Your Work Van Against Tool Theft.
Consider the demands of your trade and your needs, and invest in the van accessories that will pay for themselves with the time and money they save.

For more info call us today at (800) 565-5321, contact a product specialist or request a quote.
Learn more at: https://rangerdesign.com

10/03/19

Harbor Does Custom BIG TIME!!! - Harbor Truck Body



Warren Mason with Harbor Truck Body shows off a custom Workmaster with all types of LED lighting and space galore. This was made custom per the customers request and specifications. See more at http://www.harbortruck.com

10/01/19

Official 2019 SEMA Show Exhibitor Video


Domestic and international manufacturers find value in exhibiting at the trade-only SEMA to Increase awareness of their businesses, generate leads for future orders, see existing customers, network with others in the industry and introduce new products.