4/29/19

Cab To Axle Quick Guide

Cab To Axle



There are many important factors to ensure compatibility between a body and a chassis. Gross vehicle weight rating, gross axle weight rating, payload, wheelbase, fuel and DEF tank location are just a few to consider. Utilizing an experienced and professional upfitter will ensure your next purchase won’t yield an incompatible body and chassis. Regardless if you lean on your truck equipment distributor to do it all from spec’ing to installation or if you prefer to dream up your own upfit, you should always understand how the cab to axle measurement comes into play.

Use this quick guide to determine what body will fit with your next chassis.

* List contains common cab to axle measurements of Ford, GM & Ram cab chassis and standard Knapheide product body lengths.
** Always use an experienced truck equipment upfitter to help determine what chassis, body and equipment are compatible and comply with all federal, state and local commercial vehicle regulations.
*** Body lengths in table are nominal length, please refer to Knapheide specification pages for exact body lengths.

        Cab To Axle
    Service/Utility
    Platform
Gooseneck
Dump
36" 7' 7' 7'
40" 7' 7' 7'
42" 7' 7' 7'
56" 8' 8' 8'
60" 9' 9' 9' 9'
84" 11' 10' | 11' | 12' 11' 11'
108" 13' 13' | 14' | 16'

120" 14' 14' | 16' | 18'

Source: Knapheide.com

4/27/19

Pickup Vault - A.R.E. Truck Caps and Tonneau Covers


To learn more about the Pickup Vault, and other accessories offered by A.R.E.,
 please visit their website at www.4are.com.

4/25/19

COMPARE AIR COMPRESSOR, GENERATOR & WELDER COMBOS FOR WORK TRUCKS

It’s not an easy task to compare systems that combine an air compressor, generator and welder into one tidy package, but we’re here to help! In this article, we compare several of the most popular air compressor generator welders and tell you everything you need to know to make a smart buying decision.
Air compressor generator welder combos are a great option for mobile operators who perform a variety of tasks on the go and never know exactly what’s waiting for them on a remote job site. These combo systems are popular with mobile mechanics, heavy equipment repair technicians, and other multi-talented operators who are frequently out in the field.
VMAC-MF-Finning
Compressor generator welder systems go by many names, including:
  • 6-in-1
  • All-in-one
  • Multi-power
  • Power system
  • Power pack
  • Multifunction system
  • And more (including many combinations of the words above!)
Most of these systems include an air compressor, a generator, and a welder, but it’s also common to add a battery booster, battery charger, and specialty features as well.
Let’s take a look at a few of the most popular compressor generator welders in North America


4/23/19

The DECKED Brand Product Story


Born in Idaho, made in the USA, DECKED innovates products that make working in and around vehicles more efficient, safer and easier. Our manufacturing partners help us produce the highest quality products on the market right from the heartland of America.

We started thinking about DECKED in 2011, and by 2014 we were shipping our first full bed-length drawer storage systems. With a relentless eye on product quality and customer satisfaction, we are driven by the needs of the working man and woman.

See more at https://decked.com/

4/21/19

121 Ways to Save Fuel: Tires

1) Buy fuel-efficient tires

Getting the right tire at the right wheel position can improve fuel economy by several percentage points.

About 13% of each gallon of fuel consumed goes solely to overcoming rolling resistance. That can vary by the load on the tire, the tread pattern and of course, inflation pressure.


“The relationship between rolling resistance and fuel consumption is about 8:1,” says Rick Phillips, senior director of sales, commercial and OTR products at Yokohama Tire. “An 8% reduction in tire rolling resistance will result in a 1% savings in fuel consumption.”

Various wheel positions have different impacts on fuel economy.

“On a tractor-trailer combination, the steer tires contribute 15-20% to fuel economy, drive tires 30-40% and trailer tires about 40-50%,” says William Estupinan, vice president of technical service for Giti Tire USA. “The first priority for a fleet interested in saving a significant amount of money is to start moving toward fuel-efficient tires for the trailer axles.”

A tight rib pattern, thinner tread — 12/32- to 20/32-inch of tread depth — and advanced compounding make today’s trailer tires very fuel-efficient.
With drive tires, traction and durability are higher on the list of priorities. But traction hasn’t really suffered in a significant way in the quest for lower rolling resistance, manufacturers say.

Learn more at: http://www.truckinginfo.com/article/story/2014/06/121-ways-to-save-fuel-tires.aspx

4/19/19

Sortimo By Knapheide Overview


Sortimo by Knapheide allows users to create unique and customized storage solutions to meet their specific needs. We are committed to being the leader for organizational systems for commercial vehicles and getting our customers from curbside to the work site - fast.

4/17/19

Get More Payload with Knapheide Aluminum Flatbed Truck Bodies

Hauling feathers probably isn't a part of your day job, so you need the most payload you can get out of your truck. Lucky for you, aluminum platform bodies from Knapheide are lightweight but not light duty. 

no-label


Take a closer look to see for yourself. Are you looking for a flatbed truck body that’s easy on payload but heavy on features and toughness? Look no further than the new Aluminum Platform Body from Knapheide. With a desire to never settle for second best, we spent years designing and testing our aluminum product lines to ensure they’re lightweight but not light duty. Assembled with aerospace techniques and utilizing military-grade aluminum extrusions, the aluminum platform body is class-leading in strength, durability and longevity. Available in lengths from 7’ to 18’, there’s a tough, long-lasting aluminum platform body for your application no matter how big or small.

Learn more at: https://www.knapheide.com/platform-bodies/aluminum-platform-bodies-p795?utm_campaign=apb-push-email-3-201902&utm_medium=email&utm_source=eloqua&utm_content=product-page&elqTrackId=33d6f7e3acd14aadbfc6d814ea104beb&elq=a3c7ca490527492c99a3371fd8b5204f&elqaid=1024&elqat=1&elqCampaignId=490



4/15/19

Take Idle off Your Truck With the Miller EnPak A30 Power System




The EnPak A30 all-in-one solution reduces idle time on your truck by up to 75 percent and provides technicians with the power they need to get jobs done. Less idle time reduces costly maintenance and lowers the risk of unplanned downtime that can leave your truck and technician stranded. Using the EnPak A30 unit instead of your truck engine is the best way to improve your bottom line, maximize efficiency and keep your technicians and customers satisfied. Equipped with compressed air, battery charge/crank assist, electric power, inverter-based welding and more, this power system is the quietest, most fuel-efficient all-in-one. The EnPak A30 power system maintains PTO-driven power capabilities, including 12V DC, in a compact, lightweight solution that’s backed by the industry-leading reliability and performance you expect. To learn more, visit: https://www.millerwelds.com/equipment...

4/13/19

Lift the Load with a Venco Venturo ET6K Electric Crane


The standard configuration for the ET6K includes a manual extension boom from six to 10 feet and hydraulic elevation from -5 to +75 degrees. The crane’s rating is 6,000 foot-pounds with a maximum lifting capacity of one ton – falling below the OSHA requirement for operator certification – making it exempt from OSHA 1926.1427 operator certification requirements.

The ET6K winch features a high-efficiency, heavy-duty three-stage electric planetary gear drive, 12V permanent magnet motor and dual braking systems, and comes standard with a capacity overload shut-off system, aircraft-quality wire rope, and remote control pendant.

Available options include radio remote control, anti two-block system which meets ANSI B30.5 safety standards, mounting pedestals for platform body applications, outriggers and jacklegs for a variety of truck bodies and an adjustable boom rest with a load block storage hook.

The ET6K is recommended for general service applications on any truck with a GVWR of 8,000 LBS or more.

- See more at: http://venturo.com/product/et6k/

4/11/19

Introducing NTEA's 55th Board Chairman, Wm. Craig Bonham



Wm. Craig Bonham, VP of Commercial Vehicle, Safe Fleet (Belton, Missouri) was installed as NTEA's 55th Board Chairman on March 7, 2019 at the President's Breakfast and Annual Meeting held during WTS19.

4/09/19

VOCATIONAL TRADE SHOWS YOU SHOULDN'T MISS

Trade Shows By Vocations

AGRICULTURE

National Farm Machinery Show - For over 50 years, the National Farm Machinery Show has offered the most complete selection of cutting-edge agricultural products, equipment and services available in the farming industry. Business professionals from around the world gain knowledge and hands-on access to various technological advancements needed for the upcoming farming season during the four-day show.

World Ag Expo - World Ag Expo is the world's largest annual agricultural exposition. More than 1,500 exhibitors display the latest in farm equipment, communications and technology on 2.6 million square feet of exhibit space. Free seminars focus on a variety of topics important to dairy producers, farmers, ranchers and agribusiness professionals.

Farm Progress Show - Farm Progress Show, the nation’s largest outdoor farm event, annually hosts more than 600 exhibitors displaying new farm equipment, tractors, combines and farm implements; seed and crop protection products; and many additional farm supplies and services.

Husker Harvest Days - Farm Progress' Husker Harvest Days is the nation's largest, totally irrigated working farm show. With more than 500 exhibitors, the show provides farmers and ranchers direct access to company representatives and allows the opportunity to gain hands-on knowledge about the latest products and services available.

CONSTRUCTION

World of Concrete - World of Concrete is the industry’s only annual international event dedicated to the commercial concrete and masonry construction industries.

International Builders Show - IBS is the largest gathering of home building professionals in North America, and your best opportunity to get all the business tools you need—in three days! No other event brings together people, products and trends like the Builders' Show.

CONEXPO-CON/AGG - CONEXPO-CON/AGG is North America’s largest construction trade show representing asphalt, aggregates, concrete, earthmoving, lifting, mining, utilities and more.

National Hardware Show - At the National Hardware, you'll find everything you need to move your business forward including new buying opportunities, merchandising ideas & solutions, money-saving deals & face-to-face networking opportunities. The future of home improvement is here.

Kitchen & bath Industry Show - The Kitchen & Bath Industry Show (KBIS) is North America's largest trade show dedicated to all aspects of kitchen and bath design.

ELECTRICAL

NECA - The National Electrical Contractors Association (NECA) is the voice of the $130 billion electrical construction industry that brings power, light, and communication technology to buildings and communities across the US.

HVACR

AHR Expo - The International Air-Conditioning, Heating, Refrigerating Exposition (AHR Expo) has grown into the event of the year for the HVACR industry. The Show provides a unique forum for the entire HVACR industry to come together and share new products, technologies, and ideas.

LANDSCAPING - TREE CARE

GIE + Expo - Two tradeshows – GIE+EXPO and Hardscape North America – co-located in one central location, provide your No. 1 opportunity to see what the industry is buzzing about.

TCI Expo - Hosted by the Tree Care Industry Association (TCIA), TCI EXPO is the world's largest tree care industry trade show and conference.

MINING

MINExpo - MINExpo INTERNATIONAL® is the world's largest expo for mining equipment, products & services.

PEST CONTROL

PestWorld - Every year, NPMA gathers thousands of pest management professionals from across the globe to offer opportunities for information sharing, provide access to the latest products, services, and technologies in the 100,000 square foot exhibit hall, and generate critical thinking in world-class educational sessions..

PLUMBING

ASPE Expo - The American Society of Plumbing Engineers (ASPE) Convention & Expo is dedicated to quality education, connections and experiences for those skilled in the design, specification and inspection of plumbing systems.

TELECOMMUNICATIONS

Cable-TEC Expo - The epicenter for innovative thinking, Cable-Tec Expo is the industry’s largest cable telecom event in North America. Nothing else comes close. If you only attend one professional conference all year, this is the one..

UTILITIES - MUNICIPAL

ICUEE - ICUEE is the utility industry's largest trade show, covering 28+ acres of indoor and outdoor exhibits, and bringing together more than 18,000 utility professionals every two years.

Power-Gen International - As the World's Largest Power Generation Event, POWER-GEN International is the industry leader in providing comprehensive coverage of the trends, technologies and issues facing the generation sector.

4/05/19

TOOL TECH HIGHLIGHTS

Tech Tools
The days of the a simple hammer, square and a tape measure being all you need to get the job done are gone. While these are still viable tools, there’s been a great deal of advancement in contractor tool technology that makes your job easier than ever before. Here are some of our favorite new tool technologies being used today.

LASER LEVEL & TAPE MEASURE

While levels and tape measures are time-tested jobsite staples, there’s always room for improvement. Laser levels can quickly and accurately provide both horizontal and vertical level lines in an instant. In the same interest of saving time, a laser tape measure can quickly give a readout of distance between walls.

LED LIGHTS

For when those long days become nights, an LED light bar helps you continue working around the clock. Many of these battery-powered lights are magnetic to maximize versatility. By utilizing power-sipping LED lights, these lights should work long into the night.

HEATED JACKETS

Sometimes the cold weather creeps in and it’s not possible to prep your jobsite for with heating elements. That’s where a heated jacket can come in handy. Even if your jobsite is plenty warm, a heated jacket is still a great option when moving from place to place on a cold day.

INSPECTION CAMERA

Sometimes, you just can’t get a good look at the situation on the job. Whether it’s snaking a drain or getting a better look in an attic, an inspection camera gives you the additional range to get into those hard-to-reach spaces and know what you’re up against.

DRONE

Similar to an inspection camera, a drone gives you the ability to survey a jobsite quickly and easily. When it comes to site surveying, drones are an up and coming method. Some drones built-in cameras even have the ability to collect survey grade data for jobsites within minutes.

BARCODE TOOL SCANNER

Keeping track of your tools as they move between the shop, work vehicles and the jobsite can be a daunting task. Having your tools barcoded and scanned in and out using an inventory management system. This helps maintain who’s checked out a tool, so you always know where it’s at. Additionally, inventory management systems can help track usage for improved maintenance and upkeep of your tools.

CONTRACTOR PHONE APPS

Our phones are more powerful than ever. While they’re great devices for communication and entertainment, many contractors are beginning to harness that power on the job. There are a number of applications available to help contractors handle job quoting, project management, construction calculators, safety guidelines, and even gas savings.
Make sure you’re always on the lookout for ways to make your job easier by keeping up with the latest work technologies for your particular vocation.

SOURCE: https://www.knapheide.com/news/blog/2019/01/tool-tech-highlights

4/03/19

How to load and unload the Kargo Master 4A92L EZ Dropdown Ladder Rack


Kargo Master makes it easy to load and unload your ladder racks. The 4A92L features aluminum design and ergonomic loading to make it easy to grab your ladder and go!

4/01/19

Prime Design high roof van ErgoRack Demo


Watch how Prime Design's ErgoRack allows for productive, safe, and easy loading and unloading of a ladder. With the Ergorack you can load a ladder in 20 seconds or less without risking injury by climbing on a bumper or tire. The ErgoRack fits on almost any commercial van and truck model, wheelbase, and height. Be sure to subscribe to our channel and watch this demo of an ErgoRack on a Ram ProMaster.